Installation and operation of peanut butter machine
Put the peanut butter machine in the operating convenient room or outdoor. First, ground the shell with a wire. The current of the power transmission line shall not be less than 6-10 times of the calibrated current on the the nameplate and the stubby the better.
Note: transmission line with small diameter may lead to serious line loss and the voltage is lower that the motor may get burnt easily.
When baking of sesame, leaf stalks, iron sand, stones and other impurities in the sesame must be removed (otherwise, it would damage the grinding wheel and lower the yield efficiency). Then, wash the sesame with clear water and bake by traditional process. At the beginning of baking, big fire should be used to release the moisture in sesame. Then, bake with steady fire and do not get the sesame coked outside and raw inside (when grinding sesame paste, the interior of sesame is yellow when being twisted by hand; when grinding sesame oil, the internal part of jujube paste is preferred). After baking, take the sesame out of the pot rapidly and be sure to let the heat and smoke from the sesame out. Then, sieve with No. 10 sieve to prevent sundry congestion. The cooked sesame had better be ground now. It should be sealed when storing.
Production of peanut butter machine:
Get the contact surface of two pieces of grinding wheel coated with edible oil first and cover. Lock the suspension clasp and regulate the handle (hand wheel) in the direction of coarse grinding until there is no contact of the two grinding wheels, then the motor can be started. Turn the regulating handle slowly in the direction of fine grinding until hearing a slight scrape (it can still turn a few rounds when the power is cut off). Adjust the adjustment lever on the hopper and close the feeder. Then, add cooked sesame seeds and slowly adjust the adjustment lever to open the feeder. After grinding for 3-5 minutes, observe whether the paste is overheating. You may turn the grinding wheel slightly to coarse direction to achieve fine grinding without smoke.
Parallel of the grinding wheel (that is, the contact area of grinding wheel is 100% when the grinding wheel rotates) is the key to obtain high efficient of peanut butter machine, which can never be ignored. If the grinding wheel is parallel, leveling can be made according to the instruction book. Leveling of peanut butter machine has been made before delivery that users had better not debug the machine.
Stop the peanut butter machine when all the material has been ground (note: do not open the machine cover when the peanut butter machine is not stopped completely), then clean out the paste in the shell and the tooth groove.
Latest News
The nutrition of peanut butter
Disassembling and cleaning of peanut butter making machine
How to choose peanut butter machine manufacturers
How to make peanut butter at home
Safe instructions of peanut butter machine
